Clock; Sample Rate; Analog In - ESI Waveterminal 192 Manual

ESI Waveterminal 192
button shows you status of control panel of each card.
For example, if you choose CARD2, The control panel becomes second card's control
panel.

2. Clock

Select this menu for choosing digital clock source of the Waveterminal 192X.
- Internal: Selecting 'Internal' makes the Waveterminal 192X's internal clock and it
becomes master clock. When you use only one Waveterminal 192X or other device was
set as slave, you have to choose this mode.
- Digital: By selecting 'Digital' you will be using the incoming digital audio data from
external device as the clock source. External device will be Master device and
Waveterminal 192X will become slave device.
This is for using more than one more Waveterminal 192X in one
- CARD SYNC:
computer system. Because all digital devices have their own clock source, you have to
set one clock as Master and others as slave. Connect from Sync out of Master clock card
to Sync In of slave card. In Master clock card, set clock source as 'Internal clock'.
Slave card should set as this 'card sync'. You can connect two cards using 2 pin sync
cable of Waveterminal 192X.

3. Sample Rate

Auto: Selecting 'Auto' sets sample rate automatically according to your audio file's
sample rate.
Lock: In this mode, you can set sample rate manually.

4. Analog In

This is where you can set input monitoring of 192X's two analog Input.
192X's input monitoring function is real-time monitoring through hardware.
That's why we recommend using the function although other software applications have
Input monitoring function too.
31