Sample Rate And Clock; Mute; Master Fader - ESI Juli@ XTe User Manual

ESI
can listen to the signal via the analog output in real-time. The monitoring level can be set using the
mouse, mouse wheel, or cursor keys.

MASTER FADER

Allows you to change the level of the final output signal. The level can be set using the mouse,
mouse wheel, or cursor keys.

MUTE

Select this button to mute each signal source.

Sample Rate and Clock

Sample Rate
Selects the sample rate for Juli@ XTe. The green lit will indicate current sample rate. Juli@ XTe
supports 44.1, 48, 88.2, 96, 176.4, 192 (kHz) as sample rates. Select 'AUTO' to match the sample
rate of the played audio source automatically (a red light shows that AUTO is on). Deselecting Auto
mode allows you to set the sample rate manually (red light AUTO is off). This selection might not
Juli@ XTe
21