Specifications - ESI Waveterminal 192 Manual

ESI

10. Specifications

1. Waveterminal 192X
1. Input type : Analog Line_In - 2 Channel (1/4" TRS phone Plug)
2. Output Type : Analog Out - 6 Channel(3 Stereo 1/4" TRS phone Plug)
Digital Out - Optical Out (TOS-LINK)
3. Input LEVEL : +4dBu balanced, +4dBu Nominal, +22.5dBu Max
4. Output LEVEL : +4dBu Unbalanced, +4dBu Nominal, +16.5dBu Max
5. Input Impedance : 10K ohm
6. Output Impedance : 100 ohm
7. Output Attenuation : Digital -127dB ~ 0dB, 0.5dB Step Size(with Mute)
8. A/D Spec
1) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz
2) Dynamic Range (S/N)
3) Frequency Response
4) Resolution
9. D/A Spec
2) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz
2) Dynamic Range (S/N)
3) Frequency Response
4) Resolution
10. Digital Out Spec
1) Type
2) Format
3) Sample Rate
4) Resolution
11. Headphone Amp Spec
1) Output Power
2) Signal to Noise Ratio: 110dB (Typical)
3) (THD+N)/S
: 123dB A-Weighted (Typical)
: 20 ~ 21.768KHz (@ fs=48KHz)
: 24 Bits
: 106dB A-Weighted (Typical)
: 20 ~ 21.768KHz (@ fs=48KHz)
: 24 Bits
: Optical connector (TOS-LINK)
: IEC-958 Consumer(S/PDIF), IEC-958
Professional(AES/EBU)
: 16, 22, 24, 32, 44.1, 48, 88.2, 96 kHz
: 24 Bits
: 60mW Max
: -70dB, 0.03% (Typical)
53
Waveterminal 192