Checking The Sewing Pattern (Ke-430D) - Brother BE-438D Instruction Manual

5-5. Checking the sewing pattern (KE-430D)

Use test feed mode to check the needle movement with only the feed mechanism operating.
Check that the needle hole does not come out from the frame of the work clamp.
1
2
3
Starting continuous test feed mode
1st step
2nd step
4441Q
[Sewing standby mode]
TEST indicator switches off
TEST indicator lights
4
If test feeding continues to the final stitch, it will then
stop.
5
1st step
TEST indicator lights
Program number flashing → lit
2nd step
• If you press the
one stitch, and if you press the
stitch. (The feed will move quicker if you keep the key pressed down.)
• If you would like to start test feed once more, press the TEST key.
TEST indicator switches off
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Press the TEST key.
Select the program number to be checked, and then set
the X-scale and the Y-scale.
• The program number will flash.
Depress the foot switch to the 2nd step.
• The feed mechanism will move to the home position
and the program number will stop flashing and
illuminate steadily.
2nd step
Depress the foot switch to the 2nd step and then release
it.
• Feed mechanism starts moving continuously one stitch
at a time.
[Fast-forward test mode]
If you depress the foot switch to the 1st step while the
feed mechanism is moving, the feeding speed will
become faster while the foot switch is being depressed.
If you would like sewing to start while test feeding is in
progress, press the TEST key to switch off the TEST
indicator.
When you depress the foot switch to the 2nd step,
sewing will start.
key when in this mode, the feed will move forward
Press the TEST key.
Depress the foot switch to the 1st step.
The work clamp will rise and the preparation for sewing
will be completed.
KE-430D, BE-438D
key, the feed will move backward one
4440Q 4441Q
4441Q
4443Q
4441Q
34