Installing The Cotton Stand; Installing The Button Tray (Be-438D); Installing The Eye Guard - Brother BE-438D Instruction Manual
Electronic direct drive lockstitch bar tacker and button sewer
Hide thumbs
Also See for BE-438D:
- Manual del instrucción (66 pages) ,
- Service manual (107 pages) ,
- Instruction manual (66 pages)
Table of Contents
Advertisement
3. INSTALLATION
3-7. Installing the cotton stand
3-8. Installing the button tray (BE-438D)
3-9. Installing the eye guard
Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.
15
3636M
4410Q
CAUTION
4411Q
KE-430D, BE-438D
(1) Cotton stand
Note:
Securely tighten the nut (4) so that the
two rubber cushions (2) and the
washer (3) are securely clamped and
so that the cotton stand (1) does not
move.
Install the button tray at a place
convenient for operation.
(1) Button tray holder
(2) Wood screws [2 pcs]
(3) Button tray
(4) Set screw
(1) Eye guard assembly
(2) Screws [2 pcs]
(3) Plain washers [2 pcs]
Hide quick links:
Advertisement
Table of Contents
