Installation; About Front Speaker Unit Installation; Horizontally; Mounting On A Wall - Denon DHT-FS3 Owner's Manual

ENGLISH

Installation

About front speaker unit installation

Select one of the two ways of installing the speaker unit.

Horizontally

Mount the feet in the screw holes in the unit's bottom panel.
• Two types of feet (0.08 ft / 25 mm or 0.11 ft / 35 mm) are included. Select the type best suited for the
place of installation.
2.4 ft /
720 mm
1.7 ft / 510 mm
NOTE:
• Be sure to mount the same type of feet in all
four holes so that the unit remains level.
<View from the side>
• When using screw type
feet, the base of flat TV can
be placed in the spaces
on the bottom of the DHT-
FS3.
b Depending on the TV's
shape, it may not be
possible to install as
shown in the picture.
b Be careful that the DHT-
FS3 does not obstruct
the TV's remote control
TV's base
sensor.
Front speaker unit

Mounting on a wall

Use the included screws to securely fasten the DHT-FS3 to the two included wall mount fittings.
2.3 ft / 690 mm
Fitting
Screw
Fitting driven
into wall

About subwoofer installation

Vertical installation

Use the included stand to install the subwoofer as shown in the picture.
Subwoofer

ENGLISH
CAUTION:
• For safety, do not place any objects on top of
or lean any objects against the DHT-FS3.
• To ensure safety, have a specialist mount the
unit on the wall.
• Be sure to fasten the connection cable to
the wall to prevent getting your hands or feet
caught, causing the DHT-FS3 to fall.
• Be sure to check for safety directly after
mounting the unit on the wall. Afterwards,
inspect periodically to be sure there is no
possibility the unit will fall. Note that DENON
will accept no responsibility whatsoever for
accidents caused by improper selection of the
place of installation or poor installation.
• For the apparatus mounted to wall, the
apparatus shall be installed on solid wood,
bricks, concrete or solid wood columns and
battens.
NOTE:
• If there is a magnet or an object generating
magnetism nearby, interaction with the DHT-
FS3 could cause color blotching on the TV.
Included stands