Power-Up Options - Fluke ProcessMeter 787 User Manual

Power-Up Options

To select a power-up option, hold down the pushbutton
shown in Table 11 while turning the rotary switch from
OFF to any on position. Wait 2 seconds before you
release the pushbutton after powering up the meter. The
meter beeps to acknowledge the power-up option.
Option
Change current span 0% setting
Disable beeper
Disable auto power-off
Only the setting for current span is retained when the
power is turned off. The others have to be repeated for
each operating session.
You may activate more than one power-up option by
holding down more than one pushbutton.
Table 11. Power-Up Options
Pushbutton Default
Remembers
last setting
Enabled
BLUE Enabled
Action Taken
Toggles between 0 and 4 mA
Disables beeper
Disables the feature that turns off the meter
power after 30 minutes of inactivity. Auto
power off is disabled regardless of this
option if MIN MAX recording is on.
ProcessMeter
Power-Up Options
27