Contacting Fluke; Safety Information - Fluke 771 Calibration Manual

771
Calibration Manual

Contacting Fluke

To contact Fluke, call:
1-888-993-5853 in USA
1-800-363-5853 in Canada
+31-402-675-200 in Europe
+81-3-3434-0181 in Japan
+65-738-5655 in Singapore
+1-425-446-5500 from anywhere in the world
Or, visit Fluke's Web site at
To register your product, visit

Safety Information

In this manual, a Warning identifies conditions and actions that pose hazard(s) to the
user. A Caution identifies conditions and actions that may damage the test instrument.
The design and manufacture of the device conforms to the latest state of technology and
the safety standards specified in IEC 61010-1/ 2
risk of damage to persons and property.
To avoid possible electric shock or personal injury, follow these
guidelines:
2
www.fluke.com
http://register.fluke.com
Read this manual before use and follow all safety
instructions.
Use the Meter only as specified in this manual; otherwise,
the Meter's safety features may be impaired.
Before each use inspect Meter and cable for damage. Look
for cracks and missing portions of the clamp and cable. Do
not use if clamp is damaged.
Use caution when working with voltages above 33 V rms
47 V peak or 70 V dc these voltages pose a shock hazard.
Do not use to measure ac current.
Do not use to measure dc mA in circuits carrying more
than 300 V CAT II.
Avoid working alone so assistance can be rendered in an
emergency.
Use extreme caution when working around bare
conductors or bus bars. Contact with the conductor could
result in electric shock.
To avoid false readings that can lead to electrical shock
and injury, replace the batteries as soon as the low battery
indicator (B) appears.
Adhere to local and national safety codes. Individual
protective equipment must be used to prevent shock and
arc blast injury where hazardous live conductors are
exposed.
edition. If used improperly, there is a
nd
XWWarning