Introduction; Contacting Fluke - Fluke ProcessMeter 789 Calibration Manual

Introduction

The information provided in this manual is for the use of qualified
personnel only. Do not perform the calibration verification tests or
calibration procedures described in this manual unless you are
qualified to do so.
The 789 ProcessMeter™ contains parts that can be damaged by static
discharge. No procedure in this document requires the case to be
opened. If you do so, follow the standard practices for handling static
sensitive devices.
The Calibration Manual for the 789 ProcessMeter (hereafter, also referred to as "the
ProcessMeter" or "the UUT") provides the following information:
•
Precautions and Safety information
•
Specifications
•
Basic maintenance (cleaning, replacing the batteries and fuses)
•
Calibration verification test procedures
•
Calibration adjustment procedures
•
Accessories and replaceable parts
For complete operating instructions, refer to the 789 ProcessMeter Users Manual (on the
CD-ROM provided).

Contacting Fluke

To contact Fluke, call:
USA : 1-888-99-FLUKE (1-888-993-5853)
Europe: +31 402-678-200
Singapore: +65-738-5655
Address correspondence to:
Fluke Corporation
P.O. Box 9090,
Everett, WA 98206-9090
USA
Or visit us on the World Wide Web:
789 ProcessMeter
WXWarning
WCaution
Canada: 1-800-36-FLUKE (1-800-363-5853)
Japan: +81-3-3434-0181
Anywhere in the world: +1-425-446-5500
Fluke Europe B.V.
P.O. Box 1186,
5602 BD Eindhoven
The Netherlands
www.fluke.com
1