Advanced Setup - ECS 945GCD-M230 Manual

30

Advanced Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Thermal Management
TM Status
Limit CPUID MaxVal
Intel XD Bit
Hyper-Threading Technology
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Other Device
Thermal Management/TM Status (Enabled/TM1)
These items display CPU's temperature and enable you to set a safe temperature to
Prescott CPU.
Limit CPUID MaxVal (Disabled)
This item can support Prescott CPUs for old OS. Users please note that under NT
4.0, it must be set "Enabled", while under WinXP, it must be set "Disabled".
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Hyper-Threading Technology (Enabled)
This item is only available when the chipset supports Hyper-Threading and you
areusing a Hyper-Threading CPU.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
Advanced Setup
Enabled
TM1
Disabled
Disabled
Enabled
Enabled
On
Enabled
Hard Drive
CD/DVD
Removable Dev.
Yes
: Move Enter : Select
+/-/: Value
F10: Save ESC: Exit
F1: General Help
F9: Optimized Defaults
Using BIOS
Help Item
For the processor its
CPUTD belows 0F41h.