Onboard Lan; Bios Firmware - ECS 945GCD-M230 Manual

Table of Contents

Advertisement

Onboard LAN

The onboard LAN controller provides either of the following features:
Compliant with IEEE 802.3u for 10/100 Mbps ethernet, IEEE 802.3ab
for 1000 Mbps ethernet
PCI Express base 1.1 compliant
Supports Wake-On-LAN (WOL) and AMD magic packet TM power
management
IEEE 802.3ab auto-negotiation support
IEEE 802.3x compliant flow control support
Expansion Options
The motherboard comes with the following expansion options:
One 32-bit PCI v2.3 compliant slot
One PCI Express x16 slot for Graphics Interface
One PCI Express x1 slots
One IDE connector that supports two IDE devices
Three 7-pin SATA connectors
The motherboard supports UDMA bus mastering with transfer rates of 133/100/
66 Mb/s.
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
Two PS/2 ports for mouse and keyboard
One LPT port
One serial port
One VGA port
Four USB ports
One LAN port
Audio jacks for microphone, line-in and line-out

BIOS Firmware

This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
Power management
Wake-up alarms
CPU parameters
CPU and memory timing
The firmware can also be used to set parameters for different processor clock
speeds.
1. Some hardware specifications and software items are subject to change
without prior notice.
2. Due to chipset limitation, we recommend that motherboard be oper-
ated in the ambiance between 0 and 50
3. To achieve better performance and air flow, we suggest that you use
a system fan on this motherboard.
Introducing the Motherboard
°
C.
3

Advertisement

Table of Contents
loading

Table of Contents