Connecting I/O Devices - ECS 945GCD-M230 Manual

20

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
PS2 Keyboard
Parallel Port (LPT)
Serial Port
(COM)
VGA Port
USB Ports
LAN Port
Audio Ports
Use the upper PS/2 port to connect a PS/2 pointing device.
Use the lower PS/2 port to connect a PS/2 keyboard.
Use LPT to connect printers or other parallel communica-
tions devices.
Use the COM port to connect serial devices such as mouse
or fax/modems.
Connect your monitor to the VGA port.
Use the USB ports to connect USB devices.
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
Use the three audio ports to connect audio devices. The
first jack is for stereo line-in signal. The second jack is for
stereo line-out signal. The third jack is for microphone.
Installing the Motherboard