Table of Contents
Advertisement
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1
Connect the auxiliary case power supply connector to ATX12V.
2
Connect the case switches and indicator LEDs to the F_PANEL.
3
Connect the standard power supply connector to ATX.
4
Connect the case speaker cable to SPK.
Connecting 24-pin power cable
The ATX 24-pin connector allows you to connect to ATX v2.x power
supply.
24-pin power cable
Installing the Motherboard
With ATX v2.x power supply, users please
note that when installing 24-pin power
cable, the latches of power cable and the
ATX match perfectly.
21
Advertisement
Table of Contents
