Table of Contents
Advertisement
Data modules and asynchronous data units
6. If you pressed ENTER/YES in the preceding step and the
CI2 LEAD = ON? prompt appears press the ENTER/YES button again to
confirm your selection.
Push the button indicated by the arrow ( )
7. When the SET CH LEAD? prompt appears, press the NEXT/NO button to
keep the default (OFF) or the ENTER/YES button
Choose a button indicated by the question mark (?)
8. If you pressed ENTER/YES in the preceding step and the CH LEAD = ON?
prompt appears, press the ENTER/YES button again to confirm your
selection.
Push the button indicated by the arrow ( )
9. If the SET CH2 LEAD? prompt appears, press the NEXT/NO button to
keep the default (OFF) or the ENTER/YES button
Choose a button indicated by the question mark (?)
74
Issue 4 October 2002
CI2 LEAD=ON?
SET CH LEAD?
CH LEAD=ON?
SET CH2 LEAD?
DATA
NEXT/NO
BACK ENTER/YES
make a change.
to
DATA
NEXT/NO
BACK ENTER/YES
?
DATA
NEXT/NO
BACK ENTER/YES
make a change.
to
DATA
NEXT/NO
BACK ENTER/YES
?
?
?
555-233-116
Advertisement
Table of Contents
