Table of Contents
Advertisement
Data modules and asynchronous data units
6. The SET 19200 SPEED? prompt appears. Press the NEXT/NO button.
Push the button indicated by the arrow ( )
7. If you selected the AT-command interface in the section
options on 7400A
module.
Setting the automatic-answer feature on 7400A DCE
You can set up the 7400A data module to automatically answer calls or you can
have it ignore calls until an operator answers manually. Set up the data module for
automatic answering unless specifically directed to otherwise.
1. When the SET ANSWER? prompt appears, press the ENTER/YES button.
Push the button indicated by the arrow ( )
2. When the ANS = AUTO? prompt appears, if you want to enable automatic
answering, press the ENTER/YES button. Otherwise, press the NEXT/NO
button.
Select an option (NEXT/NO or ENTER/YES)
3. If you pressed NEXT/NO in the preceding step, the ANS —> MANUAL?
prompt appears. If you want to disable automatic answering, press the
ENTER/YES button. Otherwise, press the NEXT/NO button.
Select an option (NEXT/NO or ENTER/YES)
64
Issue 4 October 2002
SET 19200 SPEED?
DCE'', you are finished configuring the 7400A data
SET ANSWER?
ANS = AUTO?
ANS —> MANUAL?
DATA
NEXT/NO
BACK ENTER/YES
''Setting interface
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
555-233-116
Advertisement
Table of Contents
