Table of Contents
Advertisement
Connect data modules
6. The CONTINUE? prompt appears. Press the ENTER/YES button.
Push the button indicated by the arrow ( )
7. The SET 19200 SPEED? prompt appears. Press the NEXT/NO button to
keep the default.
Push the button indicated by the arrow ( )
8. The SET AT CONTROL? prompt appears. Press the ENTER/YES button
to enable Hayes-compatible modem commands. Press the NEXT/NO
button to accept the default (OFF).
Select an option (NEXT/NO or ENTER/YES)
Use the AT CONTROL setting to let users control the data module
remotely, using a dial-up connection.
9. If you enabled AT commands, the AT = OFF? prompt appears. Press the
NEXT/NO button.
Push the button indicated by the arrow ( )
555-233-116
CONTINUE?
SET 19200 SPEED?
SET AT CONTROL?
AT=OFF?
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
Issue 4 October 2002
71
Advertisement
Table of Contents
