Altigen Advanced Call Router Manual page 17

To open the Datasource dialog box, right-click on a data Item you want to
specify using information from an existing database. Select From user
database:
To build a SQL query:
1. Enter User Name and Password information for the database.
2. Enter information for the database you are querying against. For
example:
DSN - BankAccount
Table Name - AccountBalance
Matched Field Name - CustomerPhoneNumber
Matched Field Data Type - char
Note: as you build the query, the SQL query sentence will appear in
the window at the bottom.
3. Specify the condition for this query.
a. Select the Caller Match Item data for this query - Caller ID, IVR
Path, DNIS, Item name or IVR data.
b. Add any additional condition. For example Where - &&
Balance>1000
4. Click OK. You will be returned to the Rule dialog box, where the SQL
query will be shown in the Data column and the database will be shown
in the DSN column.
Queue Announcements
Note:
Queue announcements can now be done directly through
AltiWare. Or you may use Advanced Call router for this function
if you want.
If you use Advanced Call Router to inform callers of their position in a
workgroup queue, there are two requirements:
1. In Call Router, you must create a rule with Target action "Play WG
Queue Status." In addition, enter an Item Name that matches the name
of the Auto Attendant's "Advanced Call Routing" name. The
workgroup extension information you specify in the rule must also be
entered when Call Router logs on in the Monitor window. Thus, it is a
Advanced Call Router
Advanced Call Router Manual 13