Viewing The Override Operation Run-Time - Carrier 33CS420-01 Owner's Manual

Viewing the Override Operation Run-Time

Viewing the Override Operation Run-Time
This display will track the number of hours that your thermostat has
been operating in the Override mode (see page 6.6). Press the FAN
button to reset the counter.
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
Press
Counts the number of
hours Override has
been active. Press FAN
to reset the Override Run-
FAN
Time counter.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
I2
0
Setup
Override
Page 11.2
Carrier
MODE
MODE
11
Press
PROGRAM