Additional 2-Way Lcd Remote Control Functions - Audiovox ca 6552 Owner's Manual

Additional 2-Way LCD Remote Control Functions

Check Vehicle Status
Press and release
display the current status of the vehicle.
Display Illumination
Press and hold the
seconds.
Melody / Vibration Mode
To have the remote control vibrate, play a melody tone or both each time it receives
a response from the vehicle press and release
seconds.
Button Beeps
To toggle button beeps on or off press and release
seconds.
Battery Save Mode
While in POWER SAVE MODE the 2-way LCD transmitter will NOT look for any
incoming signals from the main unit until a button is pressed. The LCD screen will
display SAVE to indicate that power save mode is ON. To enter power save mode
press and hold
Clear Flashing Icons and Melody Sound
Press the button 3 times within 3 seconds. This will clear the melody sound and
flashing icons on the LCD screen.
Stopping LCD Trigger Melody
To stop the alarm trigger melody if the system has been triggered WITHOUT
disarming the system, press any button one time only, this will not send a
command to the vehicle at this time and the alarm will continue to sound.
12
2 times then press
button for 1 second. The display will illuminate for 5
for 5 seconds.
ca6552/6552sst. 2011 Audiovox Electronics Corporation. All rights reserved.
within 3 seconds, the transmitter will
then press and hold
then press and hold
for 2
for 2