Cisco CRS-1 - Carrier Routing System Router Configuration Manual page 58

Ios xr system security configuration guide
Hide thumbs Also See for CRS-1 - Carrier Routing System Router:
Table of Contents

Advertisement

How to Configure AAA Services
Command or Action (continued)
Step 3
authorization {commands | exec} {default |
list-name}
Example:
RP/0/RP0/CPU0:router(config-line)#
authorization commands listname5
Step 4
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-line)# end
or
RP/0/RP0/CPU0:router(config-line)# commit
What to Do Next
After applying authorization method lists by enabling AAA authorization, apply accounting method lists
by enabling AAA accounting. (See the
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
SC-52
Configuring AAA Services on Cisco IOS XR Software
Purpose (continued)
Enables AAA authorization for a specific line or group of
lines.
The commands keyword enables authorization on the
selected lines for all commands.
The exec keyword enables authorization for an
interactive (EXEC) session.
Enter the default keyword to apply the name of the
default method list, as defined with the aaa
authorization command.
Enter the name of a list of authorization methods to use.
If no list name is specified, the system uses the default.
The list is created with the aaa authorization
command.
The example enables command authorization using the
method list named listname5.
Saves configuration changes.
When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting (yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
"Enabling Accounting Services"
section.)
OL-20382-01

Advertisement

Table of Contents
loading

Table of Contents