Configuring Ike Policies - Cisco CRS-1 - Carrier Routing System Router Configuration Manual

Implementing Internet Key Exchange Security Protocol on Cisco IOS XR Software
Command or Action
Step 3
no crypto isakmp
Example:
RP/0/RP0/CPU0:router(config)# no crypto isakmp
Step 4
end
or
commit
Example:
RP/0/RP0/CPU0:router(config)# end
or
RP/0/RP0/CPU0:router(config)# commit

Configuring IKE Policies

This task configures IKE policies.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
OL-20382-01
configure
crypto isakmp policy priority
encryption {192-aes AES - Advanced Encryption Standard (192-bit keys) | 256-aes AES - Advanced
Encryption Standard (256-bit keys) | 3des 3DES - Three-key triple DES | aes AES - Advanced
Encryption Standard (128 bit keys) | des DES - Data Encryption Standard (56 bit keys)}
hash {sha | md5}
authentication {pre-share | rsa-sig | rsa-encr}
group {1 | 2 | 5}
lifetime seconds
end
or
commit
show crypto isakmp policy
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
How to Implement IKE Security Protocol Configurations for IPSec Networks
Purpose
(Optional) Disables IKE at the peer router.
Saves configuration changes.
When you issue the end command, the system prompts
•
you to commit changes:
Uncommitted changes found, commit them before
exiting (yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to the
–
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
– Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
SC-117