Cisco CRS-1 - Carrier Routing System Router Configuration Manual page 169

Implementing Keychain Management onCisco IOS XR Software
Configuring the Keys to Generate Authentication Digest for the Outbound
Application Traffic
This task configures the keys to generate authentication digest for the outbound application traffic.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
key chain key-chain-name
Example:
RP/0/RP0/CPU0:router(config)# key chain
isis-keys
Step 3
key key-id
Example:
RP/0/RP0/CPU0:router(config-isis-keys)# key 8
RP/0/RP0/CPU0:router(config-isis-keys-0x8)#
OL-20382-01
configure
key chain key-chain-name
key key-id
send-lifetime start-time [duration duration-value | infinite | end-time]
end
or
commit
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
How to Implement Keychain Management
Purpose
Enters global configuration mode.
Creates a name for the keychain.
Creates a key for the keychain.
SC-163