Setting Wia Driver - Kyocera ECOSYS FS-3540MFP Operation Manual

Preparation before Use > Installing Software

Setting WIA Driver

Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
NOTE
The following is not necessary to register when using the machine possesses an IP address or host name that you
have specified during installation of WIA Driver.
1
2
Display the screen.
1
Click the Windows Start button and enter Scanner in Program and File Search. Click
View scanners and cameras in the search list.
2
Select the same name as this machine from WIA Drivers, and press the Properties.
1
2
Configure WIA Driver.
Enter the machine name.
When using SSL, select the
checkbox beside SSL.
NOTE
Enter the scanner address when the device and computer are connected via a network.
1
2
4
3
When user login administration is enabled, select the checkbox beside
Authentication, and enter Login User Name (up to 64 characters) and
Password (up to 64 characters).
When job accounting is enabled, select the checkbox beside Account
ID, and enter the account ID as many as eight digits.
2-18
5