What To Do If - John Lewis JLBIOS608 User Information

Electrolux built-in oven user information
Table of Contents

Advertisement

What to do if ...

Problem
The oven does not heat up
The oven lighting is not oper-
ating
The oven is not heating up.
Time
is lit.
An error code not listed
above appears in the time dis-
play
If you are unable to remedy the problem
by following the above suggestions,
please contact our extended warranty
administrators on 0870 010 7887 who
will give you details of your local repair
agent.
Warning! Repairs to the appliance are
only to be carried out by qualified serv-
ice engineers. Considerable danger to
the user may result from improper re-
pairs.
Possible cause
The oven has not been switched on Switch the oven on
The clock has not been set
The required settings have not
been set
The oven's automatic cut-out has
been triggered.
The house wiring fuse (in the fuse
box) has tripped
The oven light bulb is faulty
Demo mode is on.
Fault in the electronics
49
Remedy
Set the current time on the clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip several
times, please call a qualified electri-
cian
Replace oven bulb
Keep Time functions button
pressed for 2 seconds, then within
2 seconds press and hold Time
functions and
onds
Switch off the appliance via the
house fuse or the safety switch in
the fuse box and switch it on again.
If displayed again, please contact the
Customer Care Department
If you call an engineer to a fault listed in
the table, or to repair a fault caused by
incorrect use or installation, a charge
will be made even if the appliance is un-
der guarantee.
Advice on cookers with metal
fronts:
Because of the cold surface at the front
of the cooker, opening the oven door
during (or just after) baking or roasting
may cause the glass to steam up.
buttons for 2 sec-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents