Error Messages - Toshiba e-STUDIO400P Management Manual

2.SETTING ITEMS (ADMIN)
2
Specify the following items as required and press [Next].
[EAP-USER NAME] — Press this button to enter the EAP-User name.
[PASSWORD] — Press this button to enter the authentication password.
[RETYPE PASSWORD] — Press this button to re-enter the authentication password.
When you press the above buttons, the on-screen keyboard is displayed. Enter a value using the keyboard and
digital keys, and press [OK] to set the entry.
3
Confirm the settings and press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
[CRL Verification] shows whether the certificate revocation list (CRL) is enabled or disabled. To use CRL, it is
necessary to upload the certificate revocation list to the equipment from the TopAccess - Security Service
menu. Changing the CRL verification option from [Enable] to [Disable] or vice versa is also performed from
TopAccess. For details, refer to the TopAccess Guide.

Error messages

The following error messages may be displayed on the touch panel.
[802.1X] Auth Server/Switch couldn't be contacted
[802.1X] Authentication failed
[802.1X] Falling back to non-802.1X mode
Message Cause
The RADIUS server service is stopped.
Configuration for the RADIUS server is not correct.
The IEEE 802.1X switch has problem.
The username or password that the user entered is not
correct.
The certificates uploaded are wrong.
Network communication has begun using the fall back function,
ignoring IEEE 802.1X authentication.
IEEE 802.1X Authentication Setting
2 SETTING ITEMS (ADMIN)
161