Toshiba e-STUDIO400P Management Manual page 186

3 MANAGING COUNTERS (COUNTER MENU)
5
Set the limitation of this department code as required and press [OK] to register the
new department code.
For e-STUDIO6530C Series, e-STUDIO4520C Series
For e-STUDIO455 Series, e-STUDIO855 Series
COLOR — Press [ON] to enable color output limitation for this department code. When you select [ON], enter the
maximum number of the color outputs for this department code in the [Limitation] box using the digital keys. You
can enter up to "99999999". If not setting an output limitation for color outputs, press [OFF].
BLACK — Press [ON] to enable black output limitation for this department code. When you select [ON], enter the
maximum number of black outputs for this department code in the [Limitation] box using the digital keys. You can
enter up to "9999999". If not setting an output limitation for black outputs, press [OFF].
[COLOR] is available only for the e-STUDIO6530C Series and e-STUDIO4520C Series.
If you enter "0" for the limitation, it will disable printing any copies or prints using this department code.
When the number of outputs exceeds the limitation during the job being printed, a few copies that exceed
the limitation are printed and counted because the equipment cannot stop the job immediately.
For the e-STUDIO6530C Series and e-STUDIO4520C Series, you cannot set the limitation for black when
the No Limit Black function is enabled.
184 Managing Department Codes