24xx
Sensor, Paper Select Removal
1. Remove the top cover. Go to
page
4-8.
2. Remove the print unit. Go to
page
4-28.
3. Turn the print unit upside down.
4. Remove the 4 small screws securing the paper select sensor to
the left side frame. Go to
Sensor, Paper Present Removal
1. Remove the top cover. Go to
page
4-8.
2. Remove the print unit. Go to
page
4-28.
3. Turn the print unit upside down.
4. Remove the small screw securing the paper present sensor to
the bottom frame. Go to
Flags, Paper Present / Top-Of-Form Removal
1. Remove the lower feed roller. Go to
Removal" on page
2. Remove the paper present flag, or the top-of-form flag from the
paper guide. Go to
"Covers, Top Removal" on
"Print Unit Removal" on
"Sensors Removals" on page
"Covers, Top Removal" on
"Print Unit Removal" on
"Sensors Removals" on page
4-41.
"Sensors Removals" on page
"Roller, Lower Feed
Repair Information
4-43.
4-43.
4-43.
4-45