Table of Contents
Advertisement
12. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
Z7S WS Analog front panel connector
•
•
13. Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
Z7S WS Internal audio connector
2-40
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard's high-definition audio
capability.
By default, this connector is set to [AC97]. If you want to connect an HD
front panel audio module to this connector, set the Front Panel Support
Type item in the BIOS setup to [Azalia]. See section 4.4.4 Onboard
Devices Configuration for details.
AAFP
HD-audio-compliant
HD-audio-compliant
Legacy AC'97
Legacy AC'97
pin definition
pin definition
compliant definition
compliant definition
CD
Chapter 2: Hardware information
Advertisement
Table of Contents
