Table of Contents
Advertisement
To install the RAID driver in Windows
1.
During the OS installation, the system prompts you to press the F6 key to
install third-party SCSI or RAID driver.
2.
Press <F6> then insert the floppy disk with RAID driver into the floppy disk
drive.
3.
Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
1.
Insert the floppy disk/USB device with RAID driver into the floppy disk drive/
USB port.
2.
During the OS installation, select Intel ESB2E.
3.
Follow the succeeding screen instructions to complete the installation.
5-42
®
XP:
Vista:
®
Chapter 5: Software support
Advertisement
Table of Contents
