Asus Z7S WS User Manual page 35

2. Use a Phillips screwdriver to tighten
the four heatsink screws in a
diagonal sequence.
3. Connect the fan cable to the 4-pin connector labeled CPU0_FAN.
Z7S WS
®
Z7S WS CPU fan connectors
DO NOT forget to connect the CPU fan cable! Hardware monitoring errors may
occur if you fail to plug this connector.
4. Repeat steps 1 to 3 to install the other heatsink if you have installed a second
CPU, then connect the fan cable to the 4-pin connector labeled CPU1_FAN.
ASUS Z7S WS
CPU0_FAN
CPU0_FAN
PWM Control
CPU1_FAN
FAN Speed
FAN Power
GND
CPU1_FAN
PWM Control
FAN Speed
FAN Power
GND
2-13