Boot Menu - Asus A7V266-MX User Manual

First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
PNP OS Installed
Reset Configuration Data
Quick Power On Self Test
Boot Up Floppy Seek
APIC Mode
First, Second, Third, Fourth Boot Device
The Boot Menu allows you to select 13 types of boot devices. Promotion or
demotion of devices alters the priority which the system uses to boot device on
system power up. Configuration options include [Floppy] [LS120] [HDD-0] [SCSI]
[CDROM] [HDD-1] [HDD-2] [HDD-3] [ZIP100] [USB-FDD] [USB-ZIP]
[USB-CDROM] [USB-HDD] [LAN] [Disabled]
PNP OS Installed [Yes]
This field allows you to use a Plug and Play (PnP) operating system to configure
the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may
be reassigned by the OS. If you installed a non-PnP OS or if you want to prevent
reassigning of interrupt settings, keep the default setting [No].
Configuration options: [Yes] [No]
Reset Configuration Data [Disabled]
Select [Enabled], if you want to clear the Extended System Configuration Data
(ESCD). Configuration options: [Disabled] [Enabled]
Quick Power-On-Self-Test [Disabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping retesting
several times. Configuration options: [Disabled] [Enabled]
Boot up Floppy Seek [Disabled]
When enabled, the BIOS will seek the floppy disk drive to determine whether the
drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]
APIC Mode [Enabled]
When enabled, this option allows you to distribute interrupt routings other than the
16 IRQs. The Programmable Interrupt Controller (PIC) setting allows you to use
the 16 IRQs only. Configuration options: [Enabled] [Disabled]
ASUS A7V266-MX motherboard user guide
[HDD-0]
[CDROM]
[Floppy]
[Disabled]
[Yes]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
Select your boot
device priority.
2-27