Asus A7V266-MX User Manual page 53

ACPI Function
ACPI Suspend Mode
Power Management Option
HDD Power Down
Auto Suspend Timeout
Video-off Option
Video Off Method
PWR Button < 4 Sec
Run VGA BIOS if S3 Resume
AC Loss Auto Restart
C.O.P. Control
Power Up Control
Hardware Monitor
ACPI Function [Enabled]
Allows you to enable or disable the ACPI 2.0 support.
Configuration options: [Enabled] [Disabled]
ACPI Suspend Mode [S1 (POS)]
Allows you to select the ACPI state to used for system suspend.
Configuration options: [S1 (POS)] [S3 (STR)] [S1 & S3]
Power Management Option [User Define]
Configuration options: [User Define] [Min Saving] [Max Saving]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of inactivity as
set in this user-configurable field. This feature does not affect SCSI hard drives.
Configuration options: [Disabled] [1Min]...[15Min]
Auto Suspend Timeout [Disabled]
Sets the time period before the system goes into suspend mode.
Configuration options: [Disabled] [1Min] [2Min] [4Min] [6Min] [8Min] [10Min] [20Min]
[30Min] [40Min] [1Hour]
Video Off Option [Suspend -> Off ]
This field determines when to activate the video off feature for monitor power
management. Configuration options: [Suspend -> Off] [Always On]
ASUS A7V266-MX motherboard user guide
[Enabled]
[S1 (POS)]
[User Define]
[Disabled]
[Disabled]
[Suspend -> Off]
[V/H Sync+Blank]
[Instant-off]
[Auto]
[Previous State]
[85 degree]
Press [Enter] to
select [Enabled] or
[Disabled].
2-23