Neoware e140 - Thin Client User Manual page 62

ICA Connections
TIP
You can short-cut the
ICA connection setup
process by clicking
Finish on any dialog
screen.
62 Configuring ICA connections
Citrix Server
3
For
Published
and
Application
connec-
tions, select the
server or applica-
tion to which you
want to connect
from the drop-down
menu.
4
If you need to set
another primary Citrix server (for example, one located on a differ-
ent subnet from the thin client), click the
For more information concerning the dialog that opens, see the
explanation of the Server tab in the Global ICA Settings section of
the ezConnect chapter, page 56.
When finished, click
Note: When no server or application is listed in the drop-down
menu, or you know the name of the server or application, you can
directly enter the name or the IP address in the field.
Citrix Server
If neither
duces a listing, and you are using MetaFrame with browsing
enabled, click on
"TCP/IP" instead of "TCP/IP + HTTP server location." If your
servers can respond to only TCP/IP browser requests, you should
consider using the Global ICA Defaults dialog to make TCP/IP the
default network protocol. (For more information, see "Global ICA
settings" on page 55.)
When ICA browsing is required across a router, you will need to set
server location addresses using the
Next Finish
or .
Published Application
nor
Server Location
and set the Network Protocol to
Server Location
Server Location
button.
radio button pro-
dialog.