Connecting Usb Peripheral Devices For Use With Citrix Ica - Neoware e140 - Thin Client User Manual

Setting Up Your Thin Client
Connecting USB
peripheral devices
for use with Citrix
ICA
Note
To install and use USB
peripheral devices, it is
necessary that the USB
Controller settings in
your thin client's BIOS
be enabled. If upgrad-
ing from an earlier ver-
sion of NeoLinux, you
will need to enable this
setting. For information
on changing this setting
in the BIOS see
"Enabling the USB Con-
troller in the thin client
BIOS" on page 119.
18 Connecting the components
You can connect USB external drives to your NeoLinux thin client,
including floppy drives, zip drives, and CD-ROM drives. (USB
devices are not supported in Capio 504.)
1
In the ezConnect (Neoware Connection Manager) menu bar,
Settings | Connection Properties | Global ICA Settings
select
2
When the Global ICA Connection Properties tabbed dialog
appears, select the
Enable Drive Mapping
3
Click the
Add
4
Click the button.
5
When the Setup Drive Mapping dialog appears, select the drive
letter to represent the USB peripheral device you are setting up,
and type the path of the drive in the path field. When finished
Drive Maps
tab.
checkbox.
.
Click
Here