Adding Printers Using Print Manager; Open Print Manager Utility; Adding A Local Printer - Neoware e140 - Thin Client User Manual

Adding printers using Print Manager

Open Print
Manager utility
Adding a local
printer
FYI
The Print Manager util-
ity generates NeoLinux's
printcap file dynami-
cally. Use the Advanced
Information dialog to
enter custom entries you
would normally make in
the printcap file.
See "Accessing NeoLinux Print Manager utility" on page 121 for
directions on opening Print Manager.
A local printer
is one attached
to one of the
ports on the
thin client
device.
NeoLinux sup-
ports printers
connected to
the parallel
port, to the
serial ports, to
the USB ports,
and also
allows you to define a port by selecting Other.
Note: Do not make edits to a local printcap file in this version of
NeoLinux. The printcap file is generated dynamically from registry
entries when the Print Manager starts at device startup, and after
changes in the Print Manager utility. Special entries can be made
using the Additional printcap entries section on the Advanced Infor-
mation dialog.
To add a new printer, click
General Printer Information
In the Add A Printer: General Printer Information dialog, set the fol-
lowing configuration settings:
Using the NeoLinux Print Manager utility
Add
.
Adding printers using Print Manager 123