ezConnect - The NeoLinux Connection Manager
Fonts - Control font servers and path settings for the fonts on
•
your thin client.
Note: The Fonts tab may not be available on your thin client,
depending on the software version installed.
Touchscreen - If using the thin client with a touchscreen
•
device, configure and calibrate the touchscreen device from
this tab.
Mouse - Spec-
•
ify and test
your input
device set-
tings.
NeoLinux sup-
ports and auto-
matically
detects both
PS/2 and USB
mouse types at
bootup.
Changing or
adding a
mouse should be done only when the device is powered off so
that NeoLinux can automatically detect and enable mice
plugged in to PS/2 and USB ports. The default Mouse Protocol
setting of Auto allows NeoLinux to find and use mice attached
on both the PS/2 and USB ports (even simultaneously).
Mouse speed and acceleration can be set on this tab as well as
left-handed mouse use.
Keyboard - Specify and test the Repeat Rate and Delay for
•
keyboard. You can also specify the Keyboard Locale and
decide whether to enable NumLock at startup.
Appliance properties
53