Neoware e140 - Thin Client User Manual page 124

Using the NeoLinux Print Manager utility
124 Adding printers using Print Manager
Printer name [required] – This is the name of the printer that
•
will be displayed in the Select Printer dialog. Each printer that
you define must have a unique name. Spaces may be used in
printer names, but the following characters may not be used:
This entry creates the following lines for this printer in the
dynamically-generated printcap file:
<Printer name>:\
:sd=/var/spool/lpd/<Printer name>:\
If this printer is set as the default printer, then the first line of the
entry will be:
lp|<Printer name>:\
Local printer [required] – This button must be selected to add a
•
local printer to the thin client.
Port [required] – Select the port to which the printer is attached.
•
Choices are: Parallel, Serial 1, Serial 2, USB, and Other.
Device Name [required] – The device name is automatically pop-
•
ulated based on the choice made in the Port field, except for
Other.
Parallel –
/dev/lp0
Serial 1 –
/dev/ttyS0
Serial 2 –
/dev/ttyS1
USB –
/dev/usb
Other –
[empty]
The administrator may change the default device names if
desired, as long as they are valid device names to NeoLinux.
When Other is chosen in the Port field, then the administrator
must enter a device name in this field.
This entry creates the following line for this printer in the dynam-
ically-generated printcap file:
:lp=/dev/<Device Name>:\
/ \ : $ & ? " < > | # [ ] '