Panasonic AG-AC160A Operating Instructions Manual page 87

Display
Item
mode
[USER1] <CAMERA>
<PB>
[USER2] <CAMERA>
<PB>
[USER3] <CAMERA>
<PB>
[WFM] <CAMERA> Switches the WAVE FORM display that appears when the <WFM> button is
Sets the function assigned to the <USER1> button.
[INH]: No function is assigned.
[FACE This is the face detection function. Performs the AUTO IRIS/
DETECT]: AUTO FOCUS operation centering around the detected face.
Enabled when both focus control and iris control are set to
auto.
[WFM]: Selects the wave form display. This is displayed on the LCD
when shooting.
[EVF DTL]: Pressing the button emphasizes the outlines of the screen
images, making it easier to focus.
[D.ZOOM]: Selects magnification of DIGITAL ZOOM function. Each press
of the button moves to the next setting in a sequence of OFF (x
1) x 2x 5x 10, and OFF (x 1).
[DRS]: Switches the [DRS] function [ON]/[OFF].
[S.GAIN]: Selects the set value ([24dB]/[30dB]).
[ATW]: Switches the [ATW] function [ON]/[OFF].
[ATW LOCK]: Fixes the white balance value when the button is pressed
during [ATW]. Press again to perform [ATW] function.
[SHOT MARK]: Records shot mark. (Page 29) Enabled during recording,
thumbnail display, and clip display.
[INDEX]: Enabled during index recording (Page 29) (AVCHD only).
[LAST CLIP]: Deletes the last recorded clip. (Page 29)
• You cannot delete clips if the following operations are performed after
shooting.
- When switched to <PB> mode
- When changing the recording format
- When connecting to a computer using a USB cable
- When powering off the camera
- When opening the memory card slot cover
[BACKLIGHT]: Auto iris control for the backlight compensation
[SPOTLIGHT]: Switches auto iris control ON/OFF for the spotlight.
[BLACKFADE]: Black fade (Page 27)
[WHITEFADE]: White fade (Page 27)
Sets the function assigned to the <USER2> button.
The setting contents are the same as [USER1].
[D.ZOOM]
Sets the function assigned to the <USER3> button.
The setting contents are the same as [USER1].
[SHOT MARK]
pressed.
[WAVE]: Displays as a waveform.
[VECTOR]: Displays as a vector.
[WAVE/ Each press of the button moves to the next setting in a
VECTOR]:
sequence of [OFF][WAVE][VECTOR], and [OFF].
Description of settings
is the factory default mode.
87