Setting The Synchro Scan; Setting The Frame Rate - Panasonic AG-AC160A Operating Instructions Manual

Setting the synchro scan

1
Press the <DIAL SEL> button and select
[DIAL SHUTTER].
2
Turn the <SHTR/F.RATE> dial and set the
synchro scan.
3
Press the <DIAL SEL> button and select
[DIAL SYNCHRO SCAN].
4
Turn the <SHTR/F.RATE> dial.
• The [SYNCHRO SCAN] shutter speed can be
set.
• The shutter speed changes quickly when
turning the <SHTR/F.RATE> dial while holding
it down.
• Synchro scan can also be set with the
[SYNCHRO SCAN] item on the setup menu
[SCENE FILE] screen.
• The setting format can be changed with the
[SYNC SCAN TYPE] item on the setup menu
[SCENE FILE] screen.
[deg.]: angle display (180.0d etc.)
[sec]: speed display (1/48.0 etc.)
38

Setting the frame rate

1
Press the <DIAL SEL> button and select
[DIAL FRAME RATE].
2
Press the <SHTR/F.RATE> dial.
Each time the <SHTR/F.RATE> dial is pressed,
VFR OFF and the frame rate setting mode
switch.
• The frame rate can be set by turning the
<SHTR/F.RATE> dial.
• The frame rate can also be set from the
[FRAME RATE] item in the setup menu
[SCENE FILE] screen.
• Before using the frame rate function, it is
necessary to set the [REC FORMAT] item on
the setup menu [RECORDING SETUP] screen
to [PH 1080/24P] or [PH 1080/30P] (or [PH
1080/25P]).
• When you set the [SDI 24PsF] item on the
setup menu [AV OUT SETUP] screen to [ON],
the frame rate function cannot be set.