Panasonic AG-AC160A Operating Instructions Manual page 79

30 Information display
The following information is displayed
depending on the situation.
• Performance of the auto white balance or the
auto black balance
• Warning (Page 80)
• The ND filter recommended under the current
shooting conditions is displayed.
• The AWB error message ([LOW LIGHT]/
[LEVEL OVER]) (Page 21)
• The functions assigned to the USER buttons
while you hold down the <DISP/MODE CHK>
button.
31 Time stamp display
Displayed when the [TIME STAMP] item on the
setup menu [RECORDING SETUP] screen is
[ON].
32 Audio level meter display (Page 43)
33 Auto iris control display
[ ]: Standard auto iris control
STD
[ ]: Auto iris control for spotlight
SPOT
[ ]: Auto iris control for the backlight
BACK
compensation
34 IRIS METER display
Displays the preceding bar in the bottom right
of the LCD monitor/viewfinder.
Center: Indicates the normal light intensity.
Right: Indicates high-light intensity.
Left: Indicates low-light intensity.
Green dots on display:
Indicate the compensation amount
during AUTO IRIS.
35 Iris display
Displays F value.
36 Shutter speed display
Displays the shutter speed.
37 Monitor audio level meter
When you press the <AUDIO MON/ADV>
button, the sound volume output from the built-
in speaker and headphone jack is displayed.
38 DV control device status display (DV mode
only)
Displays the status of the device connected to
the <DV OUT> terminal.
[ ] (red): Shooting
[ ] (red): Shooting paused
[ ]: Device cannot be controlled or
cannot be in shooting/shooting
pause status
[ ]: Device is not connected
39 Recording aspect display (DV mode only)
Displayed when recording aspect is set to
[LETTER BOX].
79