Type 3 Battery Holder - HP MultiSeat ms6000 Maintenance And Service Manual
Maintenance & service guide: hp multiseat 6000 desktop, hp multiseat t100 thin client
Hide thumbs
Also See for MultiSeat ms6000:
- Hardware reference manual (63 pages) ,
- Troubleshooting manual (62 pages) ,
- Manual (19 pages)
Table of Contents
Advertisement
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.
Type 3 Battery Holder
1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
Figure 5-57
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.
78
Chapter 5 Removal and Replacement Procedures
Removing the battery from a type 3 holder
Hide quick links:
Advertisement
Table of Contents
