Running Pqa Diagnostics Program - Acer TravelMate 310 Service Manual

Running PQA Diagnostics Program

Note: Before running PQA Diagnostic Program, make sure that the write
enable tab of the Diagnostic Program Diskette is set to enable.
PQA
Diag Result
Press -> or <- to move around the main menu. Press Enter to enable the
selected option. The main options are Diag, Resoult, SysInfo, Option and
Exit.
The Diag option lets you select testing items and times.
The following screen appears when you select Diag from the main menu.
PQA
Result
Diag
Diag
MANUAL TEST
AUTO TEST
This screen allows you to specify the number of tests to perform. The options
are as follows:
Manual Test Performs a single test and Manual checks the selected test
items in sequence.
Chapter 4
Vx_x xx-xx-xx
Option
SysInfo
Vx_x xx-xx-xx
Option
SysInfo
Exit
Exit
71