Table of Contents
Advertisement
Power-Related Symptoms
Symptom / Error
The system will not power-on.
The system will not power-off
Battery can't be charge
PCMCIA-Related Symptoms
Symptom / Error
System cannot detect the
PCMCIA
Memory-Related Symptoms
Symptom / Error
Memory count (size) appears
different from actual size.
Speak-Related Symptoms
Symptom / Error
Speakers have noise or no
sound comes from system
Power Management-Related Symptoms
Symptom / Error
The system will not enter
hibernation
The system will not wake up from
hibernation
The system will not enter standby
after close the LCD
Battery fuel gauge does not go
higher than 90%.
Chapter 4
Spare Part / Action in Sequence
1. Battery
2. AC adapter
3. DC/DC & Charge boar
4. Main board
1. DC/DC & Charge board
2. Main board
1. Battery
2. DC/DC & Charge board
3. Main board
Spare Part / Action in Sequence
1. PCMCIA slots assembly
2. Main board
Spare Part / Action in Sequence
1. Enter BIOS Utility to execute load setup default
settings, then reboot system.
2. DIMM
3. Main board
Spare Part / Action in Sequence
1. Speaker
1. LCD FPC cabler
2. Main board
Spare Part / Action in Sequence
1. Keyboard (if control is from the keyboard)
2. Hard disk
3. Main board
1. Keyboard (if control is from the keyboard)
2. Hard disk
3. Main board
1. Upper case (LCD cover switch on the upper case)
2. Main board
1. Remove battery pack and let it cool for 2 hours.
2. Refresh battery (continue to use battery until power off,
then charge battery).
3. Battery
4. DC/DC & charge board
5. Main board
67
Advertisement
Table of Contents
