Wall Mounting (Kx-Tda600/Kx-Tda620) - Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Installation Manual

2.2 Installation of the Hybrid IP-PBX
2.2.8

Wall Mounting (KX-TDA600/KX-TDA620)

Mounting Shelves
CAUTION
• Make sure that the wall the shelves will be attached to is capable of supporting at least 4 times the
weight of the shelves.
• Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or
metal plates in the wall.
Notes
• Make sure to remove the front cover from each shelf before installing the shelves (refer to "2.2.3
Opening/Closing the Front Cover").
• Do not install any optional service cards or a PSU in the shelves before installation.
• Do not block the openings of the shelf. Allow space of at least 20 cm (8 in) above and 10 cm (4 in)
at the sides of the shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
• Be careful not to drop the shelf.
1.
Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4
screws (A).
Anchor Plug
Metal Bracket
Screw (A)
96 Installation Manual
W a ll
Hammer
Screw (A)
Metal Bracket
Anchor Plug
8 mm
(5/16 in)
30 mm
(1-3/16 in)