Washer - Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Installation Manual

2.2 Installation of the Hybrid IP-PBX
5.
Install 4 anchor plugs in the holes on the floor.
Then, fasten the base stands to the floor loosely with 4 screws (A). (This makes it easy to adjust the
position of the shelves later.)
Screw (A)

Washer

Anchor
6.
Remove the 4 tabs on the top cover of the Basic Shelf, by using a flathead screwdriver, as shown below.
62 Installation Manual
Plug
Floor
Basic Shelf
Hammer
Anchor Plug
30 mm
(1-3/16 in)
8 mm
(5/16 in)
Screw (A)
Washer
Base
Stand