3-Port Caller Id Card (Kx-Ta82493) - Panasonic KX-TA82492 - Voice Message Expansion Card Installation Manual

2.3.5

3-Port Caller ID Card (KX-TA82493)

Function
Adds Caller ID support for 3 outside (CO) lines. 1 card is installed by default for outside (CO) lines 1–
3. The first optional card can be installed for outside (CO) lines 4–6 and the second optional card can
be installed for outside (CO) lines 7 and 8.
FSK and DTMF Caller ID types are supported. For information on the type of Caller ID used in your
area, contact your telephone company.
1.
Loosen the screws and open the top and bottom front covers. (→ 2.2.3 Opening/Closing Covers)
2.
Slide the card between the guiderails until it clicks, and attach the connector to it.
For Outside (CO)
Lines 4–6
Note
Use extra care to make sure you do not damage the part of the case marked with a circle.
3.
Close the covers and secure the screws. (→ 2.2.3 Opening/Closing Covers)
Note
To uninstall the card, follow the instructions illustrated below.
1.
Push the catch on the side of one guardrail in the direction of the arrow to release it.
2.
Lift the edge of the card while holding the catch open. (Do not touch the circuit board of the card
during the operation.)
KX-TA82493
for Outside (CO)
Lines 1–3
2.3 Installing Optional Service Cards
For Outside (CO)
Lines 7 and 8
2
1
Installation Manual 45