Optional Analogue Co Expansion Card And Caller Id Sending Card With 1 Co I/F Installation - Panasonic KX-TD612E Installation Manual

2.5.2 Optional Analogue CO Expansion Card and Caller ID
Sending Card with 1 CO I/F Installation
An Analogue CO Expansion Card or Caller ID Sending Card with 1 CO I/F can be installed in
the system to add 1 analogue CO line.
CAUTION
When installing or uninstalling an Analogue CO Expansion Card or Caller ID Sending Card
with 1 CO I/F, disconnect the telephone line from the card.
1.
Remove the 2 screws.
2.
Open the front cover.
3.
Attach the optional Analogue CO Expansion Card (KX-TD61281) or Caller ID Sending
Card with 1 CO I/F (KX-TD61283) to the system and connect the cord to the connector,
then secure the screw as shown below.
Note
Be sure to connect the cord in such a way that the ferrite core is closer to the optional Analogue
CO Expansion Card or Caller ID Sending Card with 1 CO I/F than to the main board. The cord
can be installed in the wrong way, so please be careful.
Optional Analogue CO
Expansion Card (KX-TD61281) or
Caller ID Sending Card
with 1 CO I/F (KX-TD61283)
4.
Close the cover.
Installation Manual
Screw
Analogue CO Expansion Connector
Ferrite Core
Optional Card Connector
Installation
59