2.4 Installation of Optional Cards and Unit
2.4.8 Caller ID Card Installation
Installing to the Initial CO Line Card
1.
Loosen four screws for KX-TD816 or eight screws for KX-TD1232 to open the inside cover
of the main unit.
Note
If any cards, units, or cords are installed in the main unit, remove them beforehand.
2.
Attach the Caller ID Card(s) (KX-TD193) to the CO Line Card, with the spacers
(Accessory included).
One Caller ID Card for KX-TD816, and up to two Caller ID Cards for KX-TD1232 can be
installed to the initial CO Line Card.
KX-TD816
96
CO Line Card
Inside Cover
KX-TD193
CALLER ID
Caller ID Card
General Installation