Installing KX-TA82481 on 3-Port Analog CO Line and 8-Port Hybrid
Extension Card (KX-TA82483) installed to KX-TA824
Note
Install the KX-TA82481 on top of the KX-TA82483.
1.
Loosen the screws and open the top and bottom front covers. (→ 2.2.3 Opening/Closing Covers)
2.
Using cutting pliers, cut the 6 parts marked with circles, and remove the lower front panel or both
upper and lower front panels as shown below.
3.
Cut off any excess plastic in order to make the surface smooth.
2.3 Installing Optional Service Cards
(Upper Front Panel)
Lower Front Panel
Installation Manual
41