Naming Presets; Changing Am Frequency Step (European And Asian Models) - Onkyo CS-N755 Instruction Manual

Listening to the Radio—Continued

Naming Presets

You can name presets for easy identification. The preset
name may contain of up to 15 or 10 characters.
Note:
• The number of characters on massage area depends on
country.
1 Select the preset you want to name (see
page 32).
2
Press the [MENU] button, and then use the
Arrow [ ]/[
Setting".
3
Press [ENTER].
4 Use the Arrow [
"Name Edit".
5
Press [ENTER].
The available characters appear.
6
Use the Arrow [
select a character, and then press [ENTER].
Repeat this step to enter up to 15 or 10 characters.
7
When you've finished editing the name and
want to store it, be sure to use the Arrow
[ ]/[ ]/[ ]/[ ] buttons to select "OK" and
then press [ENTER]. If you fail to do this, the
name won't be saved.
• The following table shows available characters.
34
] buttons to select "Tuner
]/[ ] buttons to select
]/[ ]/[ ]/[ ] buttons to
Space:
Enters a space character.
*1
Shift :
Toggles between lower and upper case
characters.
(Left)/ (Right):
Moves the cursor left or right in the Name input
area.
*2
BS (Back Space) :
Moves the cursor backward and deletes one
character.
OK:
Confirms your entry.
Tip:
*1
This can also be performed by using the [>10]
button.
*2
Press the [CLEAR] button to clear all the characters
you have input.
Changing AM Frequency Step
(European and Asian models)
1
Press the [MENU] button, and then use the
Arrow [ ]/[ ] buttons to select "Tuner
Setting".
2 Press [ENTER].
3
Use the Arrow [ ]/[
"AM Freq. Step".
4
Press [ENTER].
5
Use the Arrow [ ]/[ ] buttons to select "AM
Step 9kHz" or "AM Step 10kHz".
6
Press [ENTER].
"Complete" appears on the display.
Tip:
• You can also use the [MENU/ENTER] jog dial on the
CD receiver.
] buttons to select